The number of projects using aluminum templates depends on the specific construction project, as different construction projects require the use of different building templates

The number of projects using aluminum templates depends on the specific construction project, as different construction projects require the use of different building templates

1. The construction of houses with beam column structures should use medium-sized composite building templates. Due to the frequent changes in the cross-section of beams and columns, it is not suitable to use multi-layer boards for cutting, so it is suitable.
2. Medium sized composite building templates can be used for wall formwork. Due to the uniform requirements of high-rise building groups of the same type, medium-sized composite building templates help ensure a high turnover rate.
3. The core tube of super high-rise or high-rise buildings should use "hydraulic climbing formwork", which combines the advantages of large formwork and sliding formwork. It can rise layer by layer with structural construction, has a faster construction speed, saves space and tower crane operations, is safe for high-altitude operations, and does not require external scaffolding. In terms of construction, it is particularly suitable for the construction of concrete inner tubes in steel structures.
4. It is recommended to use a full multi-layer board for floor building formwork, and try to use a 15-18MM thick multi-layer building formwork with phenolic coating as much as possible. After multiple uses, the edges of this type of building template are damaged and need to be cut in a timely manner to ensure that the edges of the multi-layer board are flat.