Ten advantages of aluminum formwork

Ten advantages of aluminum formwork

1： High construction efficiency and short cycle: The aluminum alloy building formwork system is a quick demoulding system, which usually takes 18-36 hours to demould. Therefore, only one layer of aluminum formwork and three layers of single support need to be configured to meet the needs. Normal construction can reach 4-5 days per layer, greatly shortening the construction period, saving management costs for the construction unit, and shortening the development cycle for real estate developers.
2： Low Reusable Cost: All accessories of the aluminum template system can be reused. The aluminum alloy template system uses integral extrusion to form aluminum alloy profiles as raw materials (6061-T6). A set of aluminum templates can be flipped and used more than 300 times during standardized construction, with low usage cost.
3： Convenient and efficient construction: The aluminum formwork system is easy to assemble and install, requiring only the addition of standard plates in proportion. The aluminum formwork weighs 18-25 kilograms per square meter and is completely assembled and transported manually during the construction process, without relying on lifting machinery and equipment (workers usually only need a wrench or small hammer for construction, which is convenient and fast). Installation workers can install 20-30 square meters per person per day (aluminum formwork installers save 30% compared to wooden formwork, and do not require technicians. Only one hour of simple training is needed for construction workers before installation).
4： Good stability and high bearing capacity: The aluminum formwork system is fully assembled using aluminum formwork. After the system is assembled, it forms a whole frame with good stability and a bearing capacity of up to 60KN per square meter, without any formwork expansion accidents.
5： Wide application range: The aluminum formwork system is suitable for all building components, such as load-bearing walls, columns, beams, floor slabs, stairs, balconies, etc., all of which can be completed in one pouring of cement.
6： After demoulding, the surface effect of the concrete is good: After demoulding the aluminum formwork, the surface quality of the concrete is flat and smooth, which can meet the requirements of finishing and plain concrete, without the need for plastering, and can save the cost of secondary plastering.
7： No construction waste is generated on site, and construction is safer: all accessories of the aluminum formwork can be reused. After demoulding, there is no garbage on site, no rust, no fire hazards, and no iron nails, saws, wood chips, wooden pins, or other construction debris on the installation site. The construction site is clean and does not generate a large amount of construction waste like using wooden formwork, fully meeting the green building construction standards. By using lightweight panels, construction personnel can work safely on the panels.
8： Design one-time molding, high precision, and strong practicality: Design one-time molding according to construction drawings, pour as a whole, and ensure tight construction with small errors and high precision, ensuring the overall strength and service life of the building. It is very suitable for standard high-rise, super high-rise buildings, and multiple buildings of the same type. Aluminum formwork can be assembled with different specifications of panels according to the project. When using the formwork to rebuild a new building, only about 20% of non-standard panels need to be replaced.
9： High recycling rate and high residual value: Aluminum alloy materials can be continuously recycled. After the aluminum template system is scrapped, when the residual value of waste disposal is high,. All materials of aluminum formwork are renewable materials, which comply with the national regulations on energy conservation, environmental protection, low-carbon, and emission reduction in construction projects, and the industrial policy of sustainable development

10： Less support system and convenient walking: Traditional construction methods such as floor slabs and platforms commonly use full support structures for formwork construction, which is labor-intensive and material intensive. The bottom support system of the aluminum alloy formwork adopts a "single tube vertical independent" support, with an average spacing of 1.2 meters, without the need for horizontal or diagonal support. The operation space is large, and the construction personnel and material handling are smooth. The dismantling of the single support is easy and convenient, and the site is easy to manage.