Our Aluminum Formwork System, Detached Villa Formwork, Tie Rod For Formwork is reliable in quality, reasonable in price, high in credibility with good after-sales service, which is the first choice for the majority of enterprises. Our company has strong technology and manufacturing strength, with a group of experts, engineering and technical personnel, management personnel with decades of practical experience. The company has advanced production technology, high quality, and its various economic and technical indicators occupy the leading position in the same industry. We look forward to your passion, creativity, and the courage to accept challenges to join us. We attach importance to the occupational health and safety of employees and continuously improve the occupational health management system.

Level measurement

1) Before assembling the formwork, measure the elevation level of the concrete floor at the assembly position.

2) The level measurement is based on T.B.M (temporary level base point).

3) The measurement records shall be archived and kept by the designated supervisor.

4) When measuring, drawing positive (+) or negative (-) on the floor to mark the measurement result is an effective method.

5) Where the elevation along the wall line exceeds the design elevation by 10mm, it should be turned to no more than 10mm. Where the wall line is lower than the reference point, plywood or wood should be used to fill the template to the required level. The corners and low places in the walls must be fully filled.

6) After the concrete is poured, the top of the starting board (K board) outside the flat mold needs to be measured horizontally. The levelness of the starting board (K board) on the outside of the flat mold will cause the structure to deviate from the center line, otherwise the template cannot maintain its sag.

7) In order to facilitate adjustment of the starting board (K board) outside the flat mold after pouring, a 26mm long hole is opened.

8) Same as the level measurement of concrete surface, the measurement records of the starting board (K board) on the periphery of the flat form shall also be archived by the designated supervisor. At the same time, deviation detection should be performed and recorded and archived

Pay off

1). The error of the wall template line should be controlled within 1mm, and a control line should be placed in parallel in the same direction 150mm from the outside of the template line.

2) The stake-out line should pass through the opening, external angle, etc. at least 150mm to facilitate the control of the correct position of the template before pouring.

3) The reference point and the stakeout point are very important, which directly affect the verticality of the wall, and it is strictly forbidden to move or damage them.

Since its inception, we have set the goal of manufacturing high-performance, high-quality, economical and practical Lianggong Reusable Light Weight Adjustable Column Plastic Formwork Moulds. Dedicated team spirit and the cooperative spirit of daring to work and take responsibility have enabled our company's products to win the favor and praise of our customers and our company's performance to rise continuously. The needs of users are the goal of our work, 'advanced technology, excellent quality, perfect service' is our constant promise!

Hot Tags: column construction formwork mold, China, suppliers, manufacturers, cheap, quotation, low price, in stock, Columns Aluminum Formwork, Aluminum Formwork, Wall Panel Aluminum Formwork, Rod Tie Aluminum Formwork System, Flat Tie Building Construction formwork, Slab Table formwork