Accurate Design Concrete Formwork Round Column With Different Size

To create accurate concrete formwork for round columns with different sizes, the following steps can be followed:

1. Determine the size and shape of the round column. Measure the diameter of the column at different heights as necessary.

2. Create a template for the column by cutting a piece of cardboard or thin plywood to the size and shape of the column.

3. Cut pieces of plywood to the height of the column and the thickness of the desired formwork. The plywood should be thick enough to hold the weight of the concrete and any reinforcing materials.

4. Use the template to trace the shape of the column onto the plywood pieces. Cut along the traced lines to create the formwork for each section of the column.

5. Assemble the formwork pieces around the column, ensuring they are level and secure. Attach the pieces together with screws or nails.

6. Place any reinforcing materials, such as rebar or wire mesh, inside the formwork.

7. Pour the concrete into the formwork, filling it completely and tamping it down to remove any air pockets.

8. Allow the concrete to cure for the recommended amount of time before removing the formwork.

9. Repeat these steps for columns of different sizes, adjusting the size of the template and formwork pieces accordingly.

Hot Tags: accurate design concrete formwork round column with different size, China, suppliers, manufacturers, cheap, quotation, low price, in stock, Aluminum Formwork System